Skip to main content
Eco Hardware

Cord Locks and Cord Ends for Sportswear Project

An anonymous sportswear project needed cord lock and cord end options for adjustable drawstring details.

Discuss your specification
Cord Locks and Cord Ends for Sportswear Project reference

Project overview

Cord Locks and Cord Ends for Sportswear Project shows how an anonymous buyer can organize hardware requirements by application, product category, material, finish, customization and quality review before requesting a quote.

Project background

Sportswear project required a privacy-safe project page that explains the sourcing situation without using a real customer name, logo, price, rating, certification or test result.

Buyer requirements

An anonymous sportswear project needed cord lock and cord end options for adjustable drawstring details.

Challenge

Cord diameter, spring feel and end cap fit needed to be matched. Plastic and metal directions needed different finish and logo discussions. The buyer needed a compact project checklist for sample review.

Problem and solution

Cord diameter, spring feel and end cap fit needed to be matched. The solution was to organize product, material, finish, customization and quality notes into an RFQ-ready case structure.

Solution

Mapped cord locks and cord ends to drawstring positions. Prepared material and color direction notes for sample confirmation. Added RFQ parameters for cord diameter, application, logo and packing.

Product details

Cord Locks & Cord Ends, Garment Accessories, Plastic Buckles were reviewed as related product directions for sportswear. Final dimensions, drawings and samples should be confirmed through RFQ.

Material and finish considerations

Material directions include Plastic, Acetal, Zinc Alloy. Finish directions include Painted Finish, Matte Black, Laser Logo. Suitability depends on product structure, target appearance and any buyer-defined testing requirement.

Customization

Customization can include logo method, size adjustment, mold review, color or finish matching, packing notes and drawing review when buyer information is available.

Quality focus

Quality focus is kept factual: dimensions, surface appearance, edge feel, movement or attachment fit, packing review and buyer-requested testing scope can be checked after the exact product is confirmed.

Project result

The case gives sportswear buyers a practical structure for reviewing cord lock and cord end hardware.

Buyer takeaway

For cord locks and cord ends, confirm cord diameter, garment position, material, color, logo need, quantity and sample approval target.

Client type
Sportswear project
Market or buyer type
Sportswear buyer review
Materials
Zinc Alloy, Plastic, Acetal
Finishes
Matte Black, Painted Finish, Laser Logo

Project challenges

  • Cord diameter, spring feel and end cap fit needed to be matched.
  • Plastic and metal directions needed different finish and logo discussions.
  • The buyer needed a compact project checklist for sample review.

Solution steps

  • Mapped cord locks and cord ends to drawstring positions.
  • Prepared material and color direction notes for sample confirmation.
  • Added RFQ parameters for cord diameter, application, logo and packing.

Specification review

Project specification notes
SpecificationRequirementNote
ApplicationSportswearConfirm actual use position before sampling.
Related hardwareCord Locks & Cord Ends, Garment Accessories, Plastic BucklesFinal item selection depends on drawings or reference samples.
Material directionPlastic, Acetal, Zinc AlloyMaterial should be reviewed with weight, finish and use condition.
Finish directionPainted Finish, Matte Black, Laser LogoApprove finish on actual sample when possible.
CustomizationLogo, size, mold, color or packing reviewArtwork and reference images improve quotation accuracy.

Quality checklist

  • dimension review
  • surface appearance review
  • edge and hand-feel review
  • movement or attachment fit review
  • packing review
  • buyer-requested testing scope review

Recorded project outcomes

Project privacy
Anonymous — No real customer name, logo or order amount is published.
Buyer output
RFQ-ready checklist — The case organizes information for quotation and sample discussion.
Evidence wording
Conditional — No unverified test result, certification or performance claim is stated.

Buyer takeaways

  • For cord locks and cord ends, confirm cord diameter, garment position, material, color, logo need, quantity and sample approval target.
  • Use the related product, application, material and finish pages to prepare a clearer inquiry.
  • Attach drawings, reference photos or sample notes when available.

Zinc Alloy engineering reference

Typical for die-cast zinc alloy. Confirm against your part drawing and testing requirement. These are material reference properties, not test results for this project.

Composition
Zn + Al + Cu + Mg — -
Density
6.6 - 6.9 g/cm3 — ASTM B311
Tensile Strength
280 - 440 MPa — ASTM B557
Yield Strength
230 - 350 MPa — ASTM B557
Elongation
2 - 5 % — ASTM B557
Hardness (Brinell)
80 - 120 HB — ASTM E10
Die Castability
Excellent — -
Surface Finish Quality
Excellent — -
Corrosion Resistance
Good (with plating) — ASTM B117
RoHS-related Requirement
Reviewed on request — IEC 62321
View material reference

Plastic engineering reference

Values are given per polymer so you can compare them directly. Confirm the polymer against your part drawing. These are material reference properties, not test results for this project.

Common Polymers
POM (acetal), PA6 / PA66 (nylon), PP (polypropylene) — -
Density
POM 1.41, PA66 1.14, PP 0.90 g/cm3 — ISO 1183
Tensile Strength
POM 60 - 70, PA66 70 - 85, PP 25 - 40 MPa — ISO 527
Melting Point
POM 165 - 175, PA66 255 - 265, PP 160 - 170 °C — ISO 11357
Water Absorption (24 h)
POM 0.2 - 0.3, PA66 1.0 - 1.5, PP below 0.05 % — ISO 62
Impact Behaviour
PA66 and POM tough; PP more flexible and lower strength — -
UV Resistance
Specify a UV stabiliser for outdoor use — -
Colour
Moulded-in colour matched to a reference chip — -
Recycled Content
Reviewed on request — -
View material reference

Acetal engineering reference

Typical for injection-moulded POM. Confirm against your part drawing and end-use temperature. These are material reference properties, not test results for this project.

Composition
Polyoxymethylene (POM), homopolymer or copolymer — -
Density
1.39 - 1.42 g/cm3 — ISO 1183
Tensile Strength
60 - 70 MPa — ISO 527
Elongation at Break
15 - 40 % — ISO 527
Melting Point
165 - 175 °C — ISO 11357
Water Absorption (24 h)
0.2 - 0.3 % — ISO 62
Friction
Low; self-lubricating, suited to sliding adjusters — -
UV Resistance
Limited unless a UV stabiliser is specified — -
Colour
Moulded-in colour matched to a reference chip — -
Recycled Content
Reviewed on request — -
View material reference