Direct Answer
Laser Logo finish can be reviewed for selected hardware projects when the base material, product structure, visual target, sample approval and testing expectations are confirmed.
Premium Finish
Laser Logo Finish for Bag & Garment Hardware
Used for logo identification, fine text, serial-style markings and subtle brand detail. Send a color reference or a sample part — we match Laser Logo against your base material and confirm it on an approved sample before bulk.
Visual EffectPrecise logo or text marking on suitable materials and surface finishes.Corrosion & Wear ResistantBuilt for long-term performanceConsistent Quality AssuranceControlled process for uniform finishMultiple Material CompatibilityWorks with Zinc Alloy, Brass, Stainless Steel
Visual Effect
- Precise logo or text marking on suitable materials and surface finishes.
- Precise marking
- Useful for small logos or text
- Can be reviewed without adding a separate color layer
Suitable Products
View All ApplicationsMaterial Compatibility
- Zinc Alloy
- Brass
- Stainless Steel
- Aluminum
Laser Logo is not automatically suitable for every material. Confirm the base material, shape, process and testing request before sampling.
View Material GuideProduction Capability
| Production | Run in-house |
|---|---|
| Base materials | Stainless steel / zinc alloy / brass / aluminum / coated metal after trial |
| Sample lead time | 3–5 days |
| Bulk lead time | 10–15 days |
| Cost vs nickel plating | +10%–25% (on top of the base finish) |
| Minimum for this process | 100 pcs per design and colour |
| Coating specification | Marking depth 0.01–0.08 mm; minimum line width 0.15 mm; vector artwork required |
| Not suitable for | Very small curved areas, dark low-contrast finishes, or deep engraving that may expose the base metal and reduce corrosion resistance. |
Permanent custom logo, serial number or QR-code marking for fashion hardware. AI, PDF or DXF vector files are preferred.
Compare finishing minimums, lead time and cost across all finishes
Durability & Testing
| Salt Spray Test | Depends on base finish: 24–240 h — typically achievable; the result for your batch is confirmed by report. |
|---|---|
| Wear & Abrasion Test | On request |
| Pull Strength Test | On request |
| Color Fastness Test | On request |
| RoHS Screening | On request |
Color Consistency
Color tone, gloss, batch difference and edge wear direction for Laser Logo should be confirmed with approved samples and project tolerance.
- Controlled bath chemistry
- Standardized plating time
- Thickness monitoring
- AQL inspection sampling
Our Finish Process
Multi-layer electroplated process for long-lasting performance and uniform appearance.
1. Pre-treatmentClean and prepare the surface for optimal adhesion.
2. Surface TreatmentThe finish layer is applied by the process appropriate to this finish and base material.
3. Color ControlColor tone is matched to the approved reference and kept consistent across the batch.
4. SealingProtective sealing layer enhances durability and anti-tarnish.
5. PackagingQuality check for color, finish, and dimensions.Related Products
Laser Logo Bag BucklesLaser Logo Metal ButtonsLaser Logo Decorative Metal TrimsLaser Logo Custom Logo HardwareRelated Materials
View MaterialsFrequently Asked Questions
Which materials are available for Laser Logo hardware?
Laser Logo hardware is quoted in Leather & PU and Woven Textile. Material and finish are quoted together, because tooling and plating cost change with the combination.
What is Laser Logo hardware used for?
On this site Laser Logo hardware is catalogued under Bags & Handbags, Garments, Denim, Outdoor Gear, Sportswear, Footwear and Underwear. End use decides the specification that gets quoted — load, exposure and washing requirements differ between them, so state the end use in the RFQ rather than the part name alone.
Where does Laser Logo hardware sit in the product range?
Laser Logo hardware appears in Labels & Tags. Related items in the same category can be quoted on one RFQ, which is usually how buyers keep finish and packaging consistent across a set.
What is Laser Logo hardware used for in bag and garment hardware?
A finish is selected to control hardware appearance, surface feel and project direction. Suitable use depends on base material, product structure, application, sample approval and testing expectation.
Which materials are suitable for Laser Logo hardware?
Material suitability varies by finish process. Each finish page lists suitable material directions, but final compatibility should be confirmed by base material, part structure, sample review and testing requirement.
Is Laser Logo hardware suitable for custom logo hardware?
Many finish options can be reviewed for logo hardware, but logo method, surface contrast, detail depth, artwork and material should be confirmed before sampling.
Project Examples
Need help choosing the right finish for your project?
Our experts are ready to advise you on materials, finishes, and custom solutions.