Direct Answer
Anodized finish can be reviewed for selected hardware projects when the base material, product structure, visual target, sample approval and testing expectations are confirmed.
Premium Finish
Anodized Finish for Bag & Garment Hardware
Mainly used for aluminum hardware where color and surface protection need project review. Send a color reference or a sample part — we match Anodized against your base material and confirm it on an approved sample before bulk.
Visual EffectColored or protective oxide layer direction mainly for aluminum parts.Corrosion & Wear ResistantBuilt for long-term performanceConsistent Quality AssuranceControlled process for uniform finishMultiple Material CompatibilityWorks with Aluminum
Visual Effect
- Colored or protective oxide layer direction mainly for aluminum parts.
- Useful for aluminum color and protection
- Can support lightweight metal hardware projects
- Provides a non-plated surface option for suitable aluminum parts
Suitable Products
View All ApplicationsMaterial Compatibility
- Aluminum
Anodized is not automatically suitable for every material. Confirm the base material, shape, process and testing request before sampling.
View Material GuideProduction Capability
| Production | Run by a qualified partner plant |
|---|---|
| Base materials | Aluminum 5052 / 6061 / 6063 preferred |
| Sample lead time | 7–10 days |
| Bulk lead time | 15–22 days |
| Cost vs nickel plating | +20%–40% |
| Minimum for this process | 500 pcs per design and colour |
| Coating specification | Type II decorative anodizing 10–20 µm; hard anodizing 25–50 µm by request |
| Not suitable for | Zinc alloy, steel or plastic; high-silicon die-cast or welded aluminum where exact color uniformity is required. |
Lightweight anodized aluminum finish for buckles, hooks, adjusters and luggage hardware. Color can vary slightly by alloy, lot and surface texture.
Compare finishing minimums, lead time and cost across all finishes
Durability & Testing
| Salt Spray Test | 168–240 h with proper sealing (ASTM B117 / ISO 9227 NSS) — typically achievable; the result for your batch is confirmed by report. |
|---|---|
| Wear & Abrasion Test | On request |
| Pull Strength Test | On request |
| Color Fastness Test | On request |
| RoHS Screening | On request |
Color Consistency
Color tone, gloss, batch difference and edge wear direction for Anodized should be confirmed with approved samples and project tolerance.
- Controlled bath chemistry
- Standardized plating time
- Thickness monitoring
- AQL inspection sampling
Our Finish Process
Multi-layer electroplated process for long-lasting performance and uniform appearance.
1. Pre-treatmentClean and prepare the surface for optimal adhesion.
2. Surface TreatmentThe finish layer is applied by the process appropriate to this finish and base material.
3. Color ControlColor tone is matched to the approved reference and kept consistent across the batch.
4. SealingProtective sealing layer enhances durability and anti-tarnish.
5. PackagingQuality check for color, finish, and dimensions.Related Products
View All ProductsRelated Materials
View MaterialsFrequently Asked Questions
Which materials are available for Anodized hardware?
Anodized hardware is quoted in Aluminum. Material and finish are quoted together, because tooling and plating cost change with the combination.
What is Anodized hardware used for?
On this site Anodized hardware is catalogued under Bags & Handbags and Sportswear. End use decides the specification that gets quoted — load, exposure and washing requirements differ between them, so state the end use in the RFQ rather than the part name alone.
Where does Anodized hardware sit in the product range?
Anodized hardware appears in D-Rings & O-Rings. Related items in the same category can be quoted on one RFQ, which is usually how buyers keep finish and packaging consistent across a set.
What is Anodized hardware used for in bag and garment hardware?
A finish is selected to control hardware appearance, surface feel and project direction. Suitable use depends on base material, product structure, application, sample approval and testing expectation.
Which materials are suitable for Anodized hardware?
Material suitability varies by finish process. Each finish page lists suitable material directions, but final compatibility should be confirmed by base material, part structure, sample review and testing requirement.
Is Anodized hardware suitable for custom logo hardware?
Many finish options can be reviewed for logo hardware, but logo method, surface contrast, detail depth, artwork and material should be confirmed before sampling.
Project Examples
Need help choosing the right finish for your project?
Our experts are ready to advise you on materials, finishes, and custom solutions.