Brushed Finish for Bag & Garment Hardware
Used for logo plates, decorative hardware, metal buckles and visible trim parts.
Discuss your specification
About Brushed Finish
Brushed Finish finish can be reviewed for selected hardware projects when the base material, product structure, visual target, sample approval and testing expectations are confirmed.
Finish overview
Linear texture and refined surface direction for a softer metallic appearance. Choose Brushed Finish when that appearance matches your product direction; we confirm it against your base material and color reference on an approved sample before bulk.
Finish definition
Brushed Finish is a surface treatment or finish direction used to control the appearance and surface behavior of suitable hardware components.
Visual effect
Linear texture and refined surface direction for a softer metallic appearance.
- Finish family
- Linear texture
- Gloss level
- Project-dependent
- Durability
- Surface-dependent
- Cost level
- Medium
- Colour stability
- Texture direction review needed
- Logo compatibility
- Good for logo plates and clean brand hardware
- Suitable materials
- mat-stainless-steel / mat-brass / mat-aluminum / mat-zinc-alloy
Production capability reference
Confirm the material, sample shade and testing scope for your part. Process minimums are separate from product order quantities.
- Production
- In-house
- Base materials
- Stainless steel / brass / aluminum / zinc alloy (simple geometry)
- Sample lead time (days)
- 5–7
- Bulk lead time (days)
- 12–18
- Cost vs nickel plating
- +20%–35%
- Minimum for this process (pcs)
- 200
- Salt spray, typically achievable
- 48–96 h with sealed topcoat (ASTM B117 / ISO 9227 NSS)
- Coating specification
- Directional grain #240–#400; target Ra 0.4–1.2 µm; optional clear coat 5–10 µm
- Not suitable for
- Tiny curved 3D parts, deep cavities, fine filigree or products requiring a mirror-polished appearance.
Premium satin/brushed metal finish for minimalist luggage, buckles and logo plates. Show grain direction on the technical drawing.
Advantages
- Refined linear texture
- Can reduce mirror-like glare
- Useful for premium logo plates and trims
Limitations
- Texture direction and surface consistency must be confirmed
- Not suitable for every small or complex geometry
Suitable uses
- Logo plates
- Decorative metal trims
- Metal buckles
- Premium hardware
Check suitability for
- Parts where linear texture cannot be controlled on the target surface
Application notes
Brushed Finish should be selected by product category, application environment, buyer visual target and sample approval process.
Material compatibility
Brushed Finish is not automatically suitable for every material. Confirm the base material, shape, process and testing request before sampling.
Quality and testing
Neutral salt spray testing (ASTM B117 / ISO 9227 NSS) and other checks for Brushed Finish hardware are arranged on request. Brushed Finish typically reaches 48–96 h in neutral salt spray (with sealed topcoat). The result for a specific order depends on the base material, coating thickness and the failure criterion you set, and is confirmed by test report.
Testing support
Testing support depends on confirmed product, material, finish and buyer standard.
Colour consistency
Color tone, gloss, batch difference and edge wear direction for Brushed Finish should be confirmed with approved samples and project tolerance.
Cost and timing
Brushed Finish can affect cost, sample review, production planning and batch stability. Final impact should be confirmed by project details.
Buying notes
When requesting Brushed Finish, include base material, product type, reference color or sample, logo requirement, quantity and testing expectation.
Additional finish notes
Finish suitability depends on material, product structure, application, color target and buyer testing requirement.
Typical products
- Logo plates
- Decorative metal trims
- Metal buckles
- Premium hardware
Typical applications
- app-bags-handbags
- app-garments




