Skip to main content
Applications

Garment Hardware and Metal Accessories for Apparel Brands

Buttons, snaps, eyelets, cord hardware and decorative trims for apparel lines and garment factories.

Discuss your specification
Garment Hardware and Metal Accessories for Apparel Brands reference

Hardware for this application

Garment hardware includes buttons, snap buttons, eyelets, grommets, cord locks, cord ends and decorative trims used for fastening, adjustment, decoration and brand details in apparel.

Application description

Garments hardware solutions organize recommended product categories, materials, finishes, customization paths, quality notes and RFQ preparation for B2B sourcing.

Application overview

Garment hardware refers to apparel accessories used on jackets, pants, coats, uniforms, sportswear and fashion garments. Selection should consider fabric type, comfort, attachment method, wash process and bulk consistency.

Sourcing summary

Garments hardware sourcing should connect buyer pain points with recommended product categories, material direction, finish direction, custom options and RFQ details.

Hardware in range
543 products across 18 categories
Published size examples
15–20 mm · 15 mm · 17.5 mm · 10 mm, 12.5 mm, 15 mm, 17 mm, 18 mm, 20 mm · 11.5–30 mm. Examples refer to individual designs; check each product for its dimensions and confirm your specification with the RFQ.
Brass properties
Density 8.4 - 8.7 g/cm3 · Tensile Strength 300 - 550 MPa · Hardness 70 - 120 HB
Iron properties
Density 7.85 g/cm3 · Tensile Strength 270 - 410 MPa · Hardness 90 - 130 HB
Zinc Alloy properties
Density 6.6 - 6.9 g/cm3 · Tensile Strength 280 - 440 MPa · Hardness 80 - 120 HB
Resin properties
Density 1.2 - 1.4 g/cm3 · Tensile Strength 40 - 75 MPa
Finishes run on these parts
Nickel, Antique Brass, Matte Black, Gunmetal, Gold, PVD, Brushed Finish, Painted Finish

Where the hardware sits

Position decides how a part is loaded, and how it fails.

Cuffs
Opened and closed constantly, and pulled at an angle.
Placket fronts
Loaded in shear as the wearer moves.
Pocket flaps
Light load, high visibility.
Yokes and decorative studs
Carry almost nothing; judged purely on appearance.

Common failure points

The symptom is rarely where the cause is.

Fastener tears a hole around itself
No reinforcement layer at that position to spread the load.
Prong wrong length after a late change
Interlining changed without re-measuring total thickness.
Complaints about comfort, not function
Back-face profile never reviewed; only the visible face was.
Full selection notes: Hardware for Garments: Placement and Attachment

Buyer review points

  • comfort on fabric and body contact areas
  • attachment strength
  • fabric compatibility
  • wash resistance
  • smooth surface and safe edge
  • logo and finish matching
  • bulk consistency

Recommended hardware

Recommended hardware for garments should be reviewed by function, attachment method, appearance target, material, finish and sample plan.

Material selection

Brass, zinc alloy, plastic, resin and stainless steel can be reviewed by garment type, weight target, attachment method and finish requirement.

Finish selection

Nickel, gold, gunmetal, antique silver, painted finish and enamel can support different apparel styles. Finish direction should be checked with fabric color, washing process and approved samples.

Customization

Garment accessories can be customized by button logo, snap cap design, eyelet size, cord end shape, trim finish, color matching, packaging and testing requirement.

Quality and testing

Attachment areas, surface smoothness, dimensions, finish appearance and function can be checked before shipment. Wash or compliance-related requirements should be confirmed before sampling.

Buying notes

When sourcing garments hardware, compare function, attachment, material, finish, logo need, quantity, sample expectation and testing requirement together.

Prepare an enquiry

For garment hardware RFQ, provide garment type, fabric, hardware type, size, material, finish, logo artwork, quantity, attachment method and wash or testing requirement.

Review the available options

Metal Buttons

Commonly reviewed for garments because the category can support comfort against skin, attachment, appearance, wash performance and batch-to-batch consistency.

Snap Buttons

Commonly reviewed for garments because the category can support comfort against skin, attachment, appearance, wash performance and batch-to-batch consistency.

Eyelets & Grommets

Commonly reviewed for garments because the category can support comfort against skin, attachment, appearance, wash performance and batch-to-batch consistency.

Cord Locks & Cord Ends

Commonly reviewed for garments because the category can support comfort against skin, attachment, appearance, wash performance and batch-to-batch consistency.

Decorative Metal Trims

Commonly reviewed for garments because the category can support comfort against skin, attachment, appearance, wash performance and batch-to-batch consistency.

Custom Logo Hardware

Commonly reviewed for garments because the category can support comfort against skin, attachment, appearance, wash performance and batch-to-batch consistency.

Brass

Review this material when its weight, structure, appearance and testing direction fit garments.

Zinc Alloy

Review this material when its weight, structure, appearance and testing direction fit garments.

Plastic

Review this material when its weight, structure, appearance and testing direction fit garments.

Resin

Review this material when its weight, structure, appearance and testing direction fit garments.

Nickel

Review this finish when the approved sample, base material and use condition fit garments.

Gold

Review this finish when the approved sample, base material and use condition fit garments.

Gunmetal

Review this finish when the approved sample, base material and use condition fit garments.

Antique Silver

Review this finish when the approved sample, base material and use condition fit garments.

Painted Finish

Review this finish when the approved sample, base material and use condition fit garments.

Enamel

Review this finish when the approved sample, base material and use condition fit garments.

Application requirements and options

Review points for Garments
NeedRecommendationBuyer note
Metal ButtonsFastening and visible brand detail for garments; brass or zinc alloy can be reviewed.Confirm shank, logo, finish and attachment method.
Snap ButtonsFunctional closure for jackets, shirts and apparel panels.Confirm cap size, fabric thickness and pull direction.
Eyelets & GrommetsDrawcord holes, ventilation and reinforced openings.Confirm inner diameter, washer structure and fabric compatibility.
Cord Locks & Cord EndsDrawstring adjustment and cord finishing.Confirm cord diameter, color matching and grip feel.
Decorative Metal TrimsLogo and style details for branded apparel.Confirm smooth edge, finish and sample approval.

Buying checklist

  • product type
  • application
  • material preference
  • finish preference
  • size/specification
  • quantity
  • logo requirement
  • testing requirement
  • drawing or reference image

Project steps

  • Review application and hardware type
  • Confirm material and finish
  • Check logo, mold and size requirements
  • Arrange sample review when needed
  • Confirm bulk production details

Choose your next step

Request samplesStart a custom projectSend a drawingRequest supporting documents