Buyer Pain Points We Solve
Each of these is addressed through material, finish, structure and sample review.
wash resistanceattachment strengthantique finish effectlogo clarity on buttons or rivetsfabric thickness compatibility
Denim Hardware for Jeans, Jackets and Workwear
Jeans buttons, rivets, snap buttons, eyelets and logo hardware for denim products and workwear styling. Tell us the strap width, load direction and finish target for your denim project — we come back with hardware, material and finish options, then sample before you commit.
- Hardware in range
- 29 products across 5 categories
- Sizes commonly produced
- Brass Locking Cufflink Button Cover: 15–20 mm · Gunmetal Shirt Button Cover: 15 mm · Rose Gold Cufflink Button Cover: 17.5 mm · Two-Hole Engraved Coat Button: 10 mm, 12.5 mm, 15 mm, 17 mm, 18 mm, 20 mm · Four-Hole Natural Wood Button: 11.5–30 mm · Zinc Alloy Sew-On Button: 18 mm · Laser-Engraved Logo Wood Button: 9-38 mm · Fabric-Covered Shank Button: 10 mm · Resin Garment Button: 12–40 ligne (L) · Bullet Rivet and Spike Stud: 7 × 9 mm, 7 × 10 mm, 7 × 14 mm, 7 × 20 mm, 7 × 21 mm, 8 × 12 mm, 10 × 25 mm, 10 × 29 mm · Metal Cord End Clip: 8–25 mm diameter · Zinc Alloy Sewing Button: 18 mm
- Brass properties
- Density 8.4 - 8.7 g/cm3 · Tensile Strength 300 - 550 MPa · Hardness 70 - 120 HB
- Iron properties
- Density 7.85 g/cm3 · Tensile Strength 270 - 410 MPa · Hardness 90 - 130 HB
- Zinc Alloy properties
- Density 6.6 - 6.9 g/cm3 · Tensile Strength 280 - 440 MPa · Hardness 80 - 120 HB
- Finishes run on these parts
- Antique Brass, Matte Black, Nickel, Brushed Finish, Painted Finish, Laser Logo
15+ YearsIndustry ExperienceOEM/ODMCustom Solutions5,000+ m²Factory Area80+Skilled EmployeesGlobal DeliveryOn-time & Reliable
Recommended Hardware Categories
View All Categories
Recommended Materials
View Material Guide
Recommended Finishes
View Finish Guide
Hardware Used on Denim
View All Products29 products in the catalogue are specified for denim. The material and finish columns list what is already tooled for each part, not what is theoretically possible.
Another 15 products are specified for denim. Filter the full catalogue by application to see them.
Where the Hardware Sits
Position decides how a part is loaded, and how it fails.
- Waistband tack button
- Set through the thickest material stack in the garment.
- Pocket corner rivets
- Where the seam changes direction under load.
- Coin pocket and back pockets
- Placement is a pattern decision; size follows the local stack.
- Branded plate or zipper puller
- Must read as one set with the button and rivets after washing.
What Usually Goes Wrong
The symptom is rarely where the cause is.
- Hardware differs from the approved sample
- Approved before the laundry rather than after it.
- Tack sits proud or holds poorly
- Length taken from denim weight instead of the real waistband stack.
- Button and rivets drift apart in tone
- Different tooling approved separately, not together.
Sourcing Notes for Denim
Denim hardware is selected for jeans, jackets, skirts and workwear styling where attachment strength, wash process, antique finish effect and logo clarity are important sourcing factors.
- Material direction
- Brass, zinc alloy, iron and stainless steel can be reviewed by denim hardware type, attachment strength, finish target and wash process.
- Finish direction
- Antique brass, antique silver, gunmetal, nickel and matte black are common denim directions. Finish should be confirmed against washing and garment process expectations.
- What can be customized
- Denim hardware can be customized by jeans button logo, rivet cap design, metal label shape, eyelet size, antique finish tone, packaging and test requirement.
- Quality and testing
- Attachment, cap appearance, logo clarity, finish color and dimensions can be checked before shipment. Wash-related review depends on buyer process and should be confirmed before sampling.
- Preparing the RFQ
- For denim hardware RFQ, provide garment type, fabric thickness, hardware type, size, logo artwork, finish target, quantity, attachment requirement and wash or testing expectation.
RFQ Checklist
- product type
- application
- material preference
- finish preference
- size/specification
- quantity
- logo requirement
Related Case Studies
View All Case Studies
Metal Snap Button Series for OuterwearAn anonymous outerwear project needed a coordinated metal snap-button series for plackets, cuffs and visible reinforcement positions.
Premium Tote Bag Hardware CollectionAn anonymous premium tote project needed a coordinated turn-lock, handle attachment and antique-brass trim direction for a structured leather collection.
Metal Buttons for Garment BrandAn anonymous garment project needed metal button options for appearance, logo direction and garment attachment review.Frequently Asked Questions
Which materials and finishes are available for denim?
denim is quoted in Zinc Alloy, Brass, Iron and Leather & PU. Available surface finishes are Nickel, Matte Black, Antique Brass, Brushed Finish, Painted Finish and Laser Logo. Material and finish are quoted together, because tooling and plating cost change with the combination.
Where does denim sit in the product range?
denim appears in Metal Buttons, Jeans Buttons, Rivets, Cord Locks & Cord Ends and Labels & Tags. Related items in the same category can be quoted on one RFQ, which is usually how buyers keep finish and packaging consistent across a set.
What hardware is commonly used for Denim?
Denim hardware commonly includes Jeans Buttons, Rivets, Snap Buttons, Eyelets & Grommets, Custom Logo Hardware, Decorative Metal Trims. The final selection should be reviewed by product structure, size, material, finish, logo requirement and testing expectation.
Which materials are suitable for Denim hardware?
Brass, Zinc Alloy, Iron, Stainless Steel can be reviewed for Denim hardware depending on weight, strength direction, appearance, finish target and order requirement.
Which finishes are common for Denim accessories?
Antique Brass, Antique Silver, Gunmetal, Nickel, Matte Black can be reviewed for Denim accessories. Finish choice should be confirmed with base material, approved sample, use condition and batch tolerance.
Can I customize logo, size or finish for Denim hardware?
Logo, size, shape, material, surface finish, color, packaging and testing requirements can be reviewed for Denim hardware when artwork, reference samples or drawings are available.
Need Expert Advice?
Our engineers can help you choose the right hardware for your denim project.
Ask Product Advice