Skip to main content
Finishes

Enamel Finish for Bag & Garment Hardware

Often used on logo hardware, decorative pieces and brand identification details.

Discuss your specification
Enamel Finish for Bag & Garment Hardware reference

About Enamel

Enamel finish can be reviewed for selected hardware projects when the base material, product structure, visual target, sample approval and testing expectations are confirmed.

Finish overview

Colored filled detail for logo, decoration and brand recognition hardware. Choose Enamel when that appearance matches your product direction; we confirm it against your base material and color reference on an approved sample before bulk.

Finish definition

Enamel is a surface treatment or finish direction used to control the appearance and surface behavior of suitable hardware components.

Visual effect

Colored filled detail for logo, decoration and brand recognition hardware.

Finish family
Color fill
Gloss level
Project-dependent
Durability
Design-dependent
Cost level
Medium to higher
Colour stability
Artwork and sample approval needed
Logo compatibility
Strong fit for filled logo and brand-color details
Suitable materials
mat-zinc-alloy / mat-brass / mat-iron

Production capability reference

Confirm the material, sample shade and testing scope for your part. Process minimums are separate from product order quantities.

Production
In-house
Base materials
Zinc alloy / brass / steel with recessed logo or decorative detail
Sample lead time (days)
8–12
Bulk lead time (days)
18–25
Cost vs nickel plating
+30%–70%
Minimum for this process (pcs)
300
Salt spray, typically achievable
48–72 h; corrosion depends on the base finish
Coating specification
Fill depth 0.3–0.8 mm; minimum line width 0.30 mm; 1–4 colors standard
Not suitable for
Artwork with lines below 0.30 mm, fill areas below 0.5 mm, shallow recesses, flexible parts or reverse undercuts.

Custom enamel logo hardware, badges and zipper pullers. Quote depends on color count, fill area, polishing and epoxy dome requirements.

Advantages

  • Adds controlled color to logo details
  • Useful for brand marks and decorative accents
  • Can highlight recessed or separated design areas

Limitations

  • Suitable fill area, edge boundary, color and process should be confirmed by artwork
  • Small details may require design adjustment

Suitable uses

  • Logo hardware
  • Decorative trims
  • Brand plates
  • Buttons

Check suitability for

  • Very small open details where fill boundaries cannot be controlled

Application notes

Enamel should be selected by product category, application environment, buyer visual target and sample approval process.

Material compatibility

Enamel is not automatically suitable for every material. Confirm the base material, shape, process and testing request before sampling.

Quality and testing

Neutral salt spray testing (ASTM B117 / ISO 9227 NSS) and other checks for Enamel hardware are arranged on request. Enamel typically reaches 48–72 h in neutral salt spray (corrosion depends on the base finish). The result for a specific order depends on the base material, coating thickness and the failure criterion you set, and is confirmed by test report.

Testing support

Testing support depends on confirmed product, material, finish and buyer standard.

Colour consistency

Color tone, gloss, batch difference and edge wear direction for Enamel should be confirmed with approved samples and project tolerance.

Cost and timing

Enamel can affect cost, sample review, production planning and batch stability. Final impact should be confirmed by project details.

Buying notes

When requesting Enamel, include base material, product type, reference color or sample, logo requirement, quantity and testing expectation.

Additional finish notes

Finish suitability depends on material, product structure, application, color target and buyer testing requirement.

Typical products

  • Logo hardware
  • Decorative trims
  • Brand plates
  • Buttons

Typical applications

  • app-bags-handbags
  • app-garments