Specification references
- Sizes we produce
- Blank Hinged Button Cover with Glue Pad 15/16/18mm: Ø15/16/18mm outer, Ø12/13/15mm platform · Recessed Bezel Button Cover Blank: Ø15 / Ø17.5 / Ø20mm · Cufflink-style Resin Inset Button Cover: 15mm · Brass Locking Cufflink Button Cover: 15–20 mm
Products covered in this guide
- Blank Hinged Button Cover with Glue Pad 15/16/18mm
Metal Buttons
- Recessed Bezel Button Cover Blank
Metal Buttons
- Cufflink-style Resin Inset Button Cover
Metal Buttons

For a custom button cover, specify the host-button size, cover clearance, attachment, insert dimensions, logo artwork, finish and quantity before requesting a sample.
Specify the insert and its attachment
For a glued insert, provide insert diameter, thickness, back profile and the available bonding area. For a recessed bezel, mark the recess and rim dimensions. Share a reference insert or drawing if the face is domed, irregular or made from a different material.
Agree how the decoration will be attached and how the assembled sample will be checked. The insert, cover and garment-button fit need to be reviewed together.
Prepare usable logo artwork
Provide vector artwork where available, plus a preview showing orientation and placement. Mark the intended logo area, any small text and whether the request is for engraving, relief, enamel or another treatment. The method is reviewed against the chosen structure and material.
If multiple names or messages are required, list the artwork variants and quantities for each. Customer-supplied logos and designs should be used only within the permission given for that project.
Request the quotation and sample in separate steps
List base material, finish reference, quantities per design, packaging and intended use with the drawing. Ask separately about existing tooling, new tooling, sample availability and any required inspection or documentation.
Approve the drawing, attachment operation, appearance and fit on a garment before bulk production. A requested trial quantity is a buyer requirement; the quoted minimum quantity and timing are confirmed after review.
Send a dimensioned drawing or reference sample and list the material, finish, quantity and approval requirements. Tooling, sample availability and commercial terms are confirmed after review.

Comparison table
| Item | Option A | Option B | Note |
|---|---|---|---|
| Blank construction | ECO26-B1-031: hinged cover with glue pad | ECO26-B1-032: recessed-bezel blank | Compare the fastening, insert clearance and bonding area with the actual host button and insert. |
| Decoration starting point | ECO26-B1-031 or B1-032: blank face for review | ECO26-B1-036: resin-inset cover direction | Use the catalogue models to describe the construction; confirm the requested decoration and finished fit in the quotation and sample. |
Buyer checklist
- Host-button diameter and thickness
- Cover outside size and internal clearance
- Hinge or attachment dimensions
- Insert size, recess and bonding area
- Vector artwork and placement
- Material and finish reference
- Quantity per artwork and sample requirements
Key takeaways
Host-button diameter and thickness; Cover outside size and internal clearance; Hinge or attachment dimensions; Insert size, recess and bonding area; Vector artwork and placement; Material and finish reference; Quantity per artwork and sample requirements.
- Host-button diameter and thickness
- Cover outside size and internal clearance
- Hinge or attachment dimensions
- Insert size, recess and bonding area
Questions about this guide
What is Custom Button Covers used for?
On this site Custom Button Covers is catalogued under Garments. End use decides the specification that gets quoted — load, exposure and washing requirements differ between them, so state the end use in the RFQ rather than the part name alone.
Where does Custom Button Covers sit in the product range?
Custom Button Covers appears in Metal Buttons. Related items in the same category can be quoted on one RFQ, which is usually how buyers keep finish and packaging consistent across a set.
What should buyers prepare before sending a Custom Button Covers RFQ?
Prepare product type, application, material, finish, size, quantity, logo requirement, sample expectation and any testing or document request.
Can Custom Button Covers samples be requested before bulk production?
Yes. Sample availability and timing should be reviewed by product structure, material, finish and buyer requirements.
Can testing documents be provided for Custom Button Covers?
Testing or compliance documents depend on actual material, finish, testing scope and available records. Requirements should be confirmed before sampling.
Discuss your hardware specification
Share your drawing, material, finish and quantity so we can review the next step with you.
Request a QuoteWhatsApp

